Advantech LNC M5800 Series, Operation Manual

Page: 149 / 197

Milling Machine Series
CNC operations
144
Advantech-LNC Technology Co., Ltd.

Reserved boundary values of the path screen display can be set up by using arrow keys on the controller's MDI
panel to move the cursor to "Reserved boundaries".

If the drawing range of the path screen display is to be changed, the cursor can be moved to the "Setting
method" field (as shown in the figure below); a set value should be entered in the input area to complete the
setting.
0: Manual. The range of a drawing preview is defined by the maximum and minimum values from manual
setting.
1: Preview result - full stroke (including movement path). The range of a drawing preview is defined by the
maximum and minimum values of the program's machining path.
2: Preview result - cutting stroke (only the cutting path is included). The range of a drawing preview is
defined by the maximum and minimum values of the program's cutting path.

When the "Setting method" field is set to 0, the cursor can be moved to the "Maximum value in range" and
"Minimum value in range" fields, and the maximum and minimum values of the of X, Y, and Z axis ranges can
also be set up.

If grid lines are required for viewing the figure, it can be set up in the "Figure grid lines" field. (0: No, 1: Yes)