Advantech LNC M5800 Series Operation Manual Download Page 77

Page: 77 / 197

Milling Machine Series

CNC operations

Advantech-LNC Technology Co., Ltd.

1.6

Diagnosis group (DGNOS)

1.6.1

Alerts and warnings

Description of alert/warning functions:



In case of a problem, abnormality, and error during system operation, or the wrong G-CODE was used during

program editing, an alert will be issued and system operation will be suspended immediately. A small window

containing an alert/warning message will appear from any given page. After the alert/warning has been resolved,

the

<Reset>

key must be pressed to clear the alert/warning.

Instructions for alerts/warnings:



Alert page: After using the

<DGNOS>

key on the MDI panel to switch to diagnosis group, the

【

Alert

】

key or the

<ALARM>

key on the MDI panel can be pressed to access this page.

Summary of Contents for LNC M5800 Series






































































































































































































Search results

Summary of Contents for LNC M5800 Series

Reviews:

Brands by name

Popular brands

Advantech LNC M5800 Series, Operation Manual

Search results

Summary of Contents for LNC M5800 Series

Reviews:

Brands by name

Popular brands