ICR-1601
67
Save
N/A
Click the Save button to save the current configuration.
Undo
N/A
Click the Undo button to restore configuration to previous setting before
saving.
Apply
N/A
Click the Apply button to apply the saved configuration.
WDS Only Mode
For the WDS Only mode, the device only bridges the connected wired clients to another WDS-enabled
WiFi device which the device associated with. That is, it also means the no wireless clients stat can connect
to this device while WDS Only Mode is selected.
WDS Only Mode
Item
Value setting
Description
Green AP
The box is
unchecked by
default.
Check the Enable box to activate Green AP function.
Time Schedule
A Must filled
setting
Apply a specific Time Schedule to this rule; otherwise leave it as (0) Always.
If the dropdown list is empty ensure Time Schedule is pre-configured. Refer
to Object Definition > Scheduling > Configuration tab.
Scan Remote AP’s
MAC List
N/A
Press the Scan button to scan the spatial AP information, and then select one
from the AP list, the MAC of selected AP will be auto filled in the following
Remote AP MAC table.
Remote AP MAC 1~4
A Must filled
setting
Enter the remote AP’s MAC manually, or via auto-scan approach, The device
will bridge the traffic to the remote AP when associated successfully.
By default, VAP 1 is enabled and security key is required to connect to the gateway wirelessly to
enhance the security level and prevent unexpected access of un-authorized devices.