ICR-1601
217
5.2.5
Backup & Restore
In the Backup & Restore window, you can upgrade the device firmware when new firmware is available
and also backup / restore the device configuration.
In addition to the factory default settings, you can also customize a special configuration setting as
a customized default value. With this customized default value, you can reset the device to the expected
default setting if needed. Also, the regular Auto Upgrade via HTTP(S)/FTP(S) source is feasible.
Go to Administration > System Operation > Backup & Restore tab.
FW Backup & Restore
Item
Value Setting
Description
FW Upgrade
Via Web UI is selected
by default
If new firmware is available, click the FW Upgrade button to upgrade the
device firmware via Web UI, or Via Storage.
After clicking on the “FW Upgrade” command button, you need to specify the
file name of new firmware by using “Browse” button, and then click
“Upgrade” button to start the FW upgrading process on this device. If you
want to upgrade a firmware which is from GPL policy, please check “Accept
unofficial firmware”
Backup
Configuration
Settings
Download is selected
by default
You can backup or restore the device configuration settings by clicking the Via
Web UI button.
Download: for backup the device configuration to a config.bin file.
Upload: for restore a designated configuration file to the device.
Via Web UI: to retrieve the configuration file via Web GUI.
Auto Restore
Configuration
The Enable box is
unchecked by default
Chick the Enable button to activate the customized default setting function.
Once the function is activated, you can save the expected setting as a
customized default setting by clicking the Save Conf. button, or clicking the
Clean Conf. button to erase the stored customized configuration.
Self-defined
Logo
Download is selected
by default.
The logo for the web UI can be downloaded or uploaded from or to the
router.
Note: The file name must be “logo.gif”.
Self-defined CSS
Download is selected
by default.
The style of web UI can be downloaded or uploaded from or to the router
through the CSS file. The CCS style can also be edited directly by Edit button.
Note: The file name must be “wmqa01.css”.