ICR-1601
35
Check Interval
1. An Optional setting
2. 5 seconds is selected
by default.
Specify a time interval as the ICMP Checking Interval.
Query Interval defines the transmitting interval between two DNS Query
or ICMP checking packets.
With ICMP Checking, the system will check connection by sending ICMP
request packets to the destination specified in Target 1 and Target 2.
Value Range: 2 ~ 14400.
Latency Threshold
1. An Optional setting
2. 3000 ms is selected
by default.
Specify a time interval as the Latency Threshold.
Latency Threshold defines the tolerance threshold of responding time.
Fail Threshold
1. An Optional setting
2. 5 times is selected
by default.
Enter a number of detecting disconnection times to be the threshold
before disconnection is acknowledged.
Fail Threshold specifies the detected disconnection before the router
recognize the WAN link down status.
Value Range: 1 ~ 10.
Target 1
1. An Optional setting
2. DNS1 is selected by
default.
Target1 (DNS1 set by default) specifies the first target of sending DNS
query/ICMP request.
DNS1: set the primary DNS to be the target.
DNS2: set the secondary DNS to be the target.
Gateway: set the Current gateway to be the target.
Other Host: enter an IP address to be the target.
Target 2
1. An Optional setting
2. None is selected by
default.
Target2 (None set by default) specifies the second target of sending DNS
query/ICMP request.
None: to disable Target2.
DNS1: set the primary DNS to be the target.
DNS2: set the secondary DNS to be the target.
Gateway: set the Current gateway to be the target.
Other Host: enter an IP address to be the target.
Save
N/A
Click Save to save the settings.
Undo
N/A
Click Undo to cancel the settings.