Advantech ICR-1601 Configuration Manual Download Page 185

Page: 185 / 273

ICR-1601

185

5.1.1

Command Script

Command script configuration is the application that allows administrator to setup the pre-defined

configuration in plain text style and apply configuration on startup.

Go to Administration > Configure & Manage > Command Script Tab.

Enable Command Script Configuration

Configuration
Item

Value setting

Description

Configuration

The box is unchecked by
default

Check the

Enable

box to activate the Command Script function.

Backup Script

N/A

Click the

Via Web UI

button to backup the existed command script in a .txt file.

You can specify the script file name in

Script Name

below.

Upload Script

N/A

Click the

Via Web UI

button to Upload the existed command script from

a specified .txt file.

Script Name

1.An Optional setting

2.Any valid file name

Specify a script file name for script backup, or display the selected upload script

file name.

Value Range:

0 ~ 32 characters.

Version

1.An Optional setting
2.Any string

Specify the version number for the applied Command script.

Value Range:

0 ~ 32 characters.

Description

1.An Optional setting
2.Any string

Enter a short description for the applied Command script.

Update time

N/A

It records the upload time for last command script upload.

Edit Plain Text Command Script Configuration

You can edit the plain text configuration settings in the Command Script Editor window as shown below.

Summary of Contents for ICR-1601


















































































































































































































































































Search results

Summary of Contents for ICR-1601

Reviews:

Brands by name

Popular brands

Advantech ICR-1601, Configuration Manual

Search results

Summary of Contents for ICR-1601

Reviews:

Brands by name

Popular brands