Advantech FWA-1320, User Manual

Page: 62 / 90

FWA-1320 User Manual 52
3.2.4 Security Setup
“Administrator Password” allows users to configure the system so that a password
after being installed is required each time the system boots, and/or an attempt is
made to enter the Setup program.
Figure 3.18 Security Setup
Table 3.12: SATA Configuration
Feature Default Description
SATA Port0 Display only
Show current SATA devices in use on the MIC-
5332
SATA Port1 Display only
SATA Port2 Display only
SATA Port3 Display only
SATA Port4 Display only
SATA Port5 Display only
SATA Mode AHCI Mode (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
Aggressive Link Power Enabled
Aggressive Link Power Management Support.
For Cougar Point B0 stepping onwards.
Note!

If ONLY the Administrator's password is set, then this only limits
access to Setup and is only asked for when entering Setup.

If ONLY the User's password is set, then this is a power on pass-
word and must be entered to boot or enter Setup. In Setup the User
will have Administrator rights.

The password length must be in the following range:
– Minimum length: 3
– Maximum length: 20