FPM-3220 User’s Manual
26
Appendix A Display Timing Mode and
OSD
A.1 Supported Input Timing Modes
The nineteen kinds of timings below are already programmed in this
module. The input synchronous signals are automatically recognized.
Table A.1: Supported Input Formats
Note 1:
Even if the preset timing is entered, a little adjust-
ment of the functions such as Horizontal period,
CLK-delay and display position, are required. The
adjusted values are memorized in every preset num-
ber.
Note 2:
This module recognizes the synchronous signals
with near preset timing of the frequency of the HS
and Vsync, even in the case that the signals other
than the preset timing that were entered.
Note 3:
Because adjustments may not fit, such as differing
magnifying ratios or, in the case that you use it
except for the display timing that was preset.
Resolution Vertical Frequencies
60 Hz
70 Hz 72 Hz 75 Hz
640 x 480
Yes
Yes
800 x 600
Yes
Yes
Yes
Summary of Contents for FPM-3220
