Advantech EKI-7712 Series, User Manual

Page: 162 / 177

EKI-7720 Series User Manual 147
To access this page, click Tools > User Account .
The following figure displays the Wrong Password Information settings.
Figure 4.224 Tools > User Account
4.11.7 N-Key
To access this page, click
Tools
>
N-Key
.
Figure 4.225 Tools > N-Key
The following table describes the items in the previous figure.
To access this page, click
Tools > N-Key
.
The following figure displays the
N-Key Information
settings.
Figure 4.226 Tools > N-Key Information
4.11.8 Reset System
To access this page, click Tools > Reset System .
Click Restore to have all configuration parameters reset to their factory default val -
ues. All changes that have been made will be lost, even if you have issued a save.
Click
Select Excepted Configuration
to keep the configuration you selected when
resetting.
Reset settings take effect after a system reboot.
4.11.9 Reboot Device
To access this page, click
Tools
>
Reboot Device
.
Item Description
State Click to enable or disable the wrong password detection function.
Retry Time Enter a variable to designate the wrong password entry threshold,
State option must be enabled.
Block Time Enter a variable to designate the lockout period in minutes after the
retry attempts threshold is reached.
Apply Click Apply to create a new user account.
Item Description
Auto Mode Click the option to set the auto mode for the N-Key status.
N-Key Status Click the drop-down menu to select N-Key status.
Apply Click Apply to create a new user account.