Advantech EKI-7710 Series, User Manual

Page: 102 / 156

EKI-7710 Series User Manual 89
To access this page, click
QoS
>
Rate Limit
>
Egress Queue
.
Figure 4.79 QoS > Rate Limit > Egress Queue
The following table describes the items in the previous figure.
The ensuing table for
FE1 Egress Per Queue Status
settings are informational only:
Queue Id and Egress Rate Limit (Kbps).
4.9 Management
4.9.1 LLDP
LLDP is a one-way protocol without request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and pro-
cessed by stations implementing the receive function.
4.9.1.1 LLDP System Settings
The LLDP System Settings allows you to configure the status (enabled or disabled)
for the protocol, set the interval for frame transmission, set the hold time multiplier
and the re-initialization delay.
Item Description
Port Click the drop-down menu to select the port to define the Egress
queue.
Queue Click the drop-down menu to set the queue order for the Egress set-
ting.
State Click
Disabled
or
Enabled
to set the Egress queue state.
CIR (Kbps) Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Apply Click
Apply
to save the values and update the screen.