Advantech EKI-7710 Series, User Manual

Page: 78 / 156

EKI-7710 Series User Manual 65
To access this page, click
L2 Switching
>
Spanning Tree
>
MST Instance ID Set-
tings
.
Figure 4.43 L2 Switching > Spanning Tree > MST Instance ID Settings
The following table describes the items in the previous figure.
The ensuing table for
MST Instance ID Information
settings are informational only:
MSTI ID and VID List.
4.5.10.7 MST Instance Priority Settings
The MST Instance Priority Settings allows you to specify the MST instance and the
bridge priority in that instance.
To access this page, click
L2 Switching
>
Spanning Tree
>
MST Instance Priority
Settings
.
Figure 4.44 L2 Switching > Spanning Tree > MST Instance Priority Settings
The following table describes the items in the previous figure.
The ensuing table for
MST Instance Priority Information
settings are informational
only: MSTI ID, Priority and Action.
4.5.10.8 MST Instance Info
To access this page, click
L2 Switching
>
Spanning Tree
>
MST Instance Info
.
The ensuing table for
STP Bridge Status
settings are informational only: Bridge
Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port
and TCNLast Topology Change.
The ensuing table for
STP Port Status
settings are informational only: Port, Identifier
(Priority / Port Id), Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost,
Item Description
MSTI ID Enter the MST instance ID (0-15).
VID List Enter the pre-configured VID list.
Move Click
Move
to save the values and update the screen.
Item Description
MSTI ID Click the drop-down menu to specify the MST instance.
Priority Click the drop-down menu set the bridge priority in the specified MST
instance
Apply Click
Apply
to save the values and update the screen.