Advantech EKI-1526/N/I/TI, User Manual

Page: 89 / 107

75 EKI-1526(TI) | 1528(TI) User Manual
6.8 Syslogd
The EKI serial device server provides the functionality to allow network devices to
send event messages to a logging server, also known as a Syslog server, by way of
the Syslogd function. The Syslog protocol is supported by a wide range of devices
and can be used to log different types of events.
6.8.1 Syslogd Setting
Users can enable the syslogd function to record historical events or messages locally
or on a remote syslog server.
To access this page, click
Syslogd
>
Syslogd Setting
.
Figure 6.12 Syslogd > Syslogd Setting
Item Description
System Event
Cold Start
Click the option to select a warning type when the device server’s
power is cut off and reconnected.
Warm Start Click the option to select a warning type when the device server is
reboot.
Authentication failure Click the option to select a warning type when an incorrect password
is entered.
IP address changed Click the option to select a warning type when the IP address is
changed.
Password changed Click the option to select a warning type when the password is
changed.
Ethernet1 link down Click the option to select a warning type when the Ethernet 1 port is
disconnected.
Ethernet2 link down Click the option to select a warning type when the Ethernet 2 port is
disconnected.
DCD changed
Port
Click the option to select a warning type of the selected port when a
change in the DCD (Data Carrier Detect) signal indicates that the
modem connection status has changed.
DSR changed
Port
Click the option to select a warning type of the selected port when a
change in the DSR (Data Set Ready) signal indicates that the data
communication equipment is powered off.
Save Click
Save
to save the values and update the screen.