Advantech EKI-1526/N/I/TI, User Manual

Page: 78 / 107

EKI-1526(TI) | 1528(TI) User Manual 64
6.5 Port Configuration
There are Basic, Operation Mode, and Advanced Setting in the serial port
configuration. For more detailed information for setting.
6.5.1 Basic
The Basic menu allows for the configuration of the serial interface type, baud rate,
parity, data / stop bits, and flow control for port configuration.
To access this page, click
Port Configuration
>
Basic
.
Figure 6.4 Port Configuration > Basic
The following table describes the items in the previous figure.
DNS Configuration
DNS
Click the radio button to select the DNS mode: Automatic or Specific.
Current Status
IP 1
Displays the current IP address 1 of the device.
IP 2 Displays the current IP address 2 of the device.
Save Click
Save
to save the values and update the screen.
Note! All new configurations will take effect after rebooting. To reboot the
device, click
Tools > Reboot .
Item Description
Item Description
Type Click the drop-down menu to select a serial interface: RS-232, RS-
422 or RS-485.
Baud Rate Enter a value to specify the baud rate. The value should conform to
the current transmission speeds of connected devices when setting
the baud rate.
Parity Click the drop-down menu to select the parity: None, Odd, Even, Mark
or Space.
Data Bits Click the drop-down menu to select the data bits: 5, 6, 7, or 8.