manualshive.com logo in svg

Advantech EKI-1526/N/I/TI, User Manual

Share
Download
Advantech EKI-1526/N/I/TI User Manual Download Page 65

51

EKI-1526(TI) | 1528(TI) User Manual

 

5.1

Setting COM Redirector

Advantech COM port mapping software is a serial COM port redirector that creates

virtual COM ports and provides access to serial devices connected to an Advantech

serial  device  servers.  Your  serial  device  applications  can  communicate  with  serial

devices connected to the Advantech serial device servers without software changes. 
Since the virtual COM ports work like standard Windows COM ports, your application

software sees no difference between a local serial device and one connected to an

Advantech serial device server.
The COM redirector utility and the virtual COM port management utility are integrated

into one utility with same GUI. The Advantech EKI Device Configuration Utility can

create all Virtual COM ports using the Auto Mapping function or by using the manual

mapping function.

5.2

Virtual COM Port Mapping

5.2.1

Auto Mapping

1.

On your desktop, navigate to 

Start > All Programs

 > 

EKI Device 

Configuration Utility

 and click 

Advantech EKI Device Configuration Utility 

to open the utility.

2.

Under Serial Device Servers, locate 

your server and click the icon to expand 

the listing.

3.

Select the target device and right-click on it to open up the options menu 

window.

4.

Locate 

Auto Mapping

 and select it.

Figure 5.1 Selecting Auto Mapping

The 

Batch Automatic Mapping Virtual COM Port

 window displays.

5.

Locate 

From System Port

 and click the drop-down menu to select the target 

COM port.

6.

From the network address list, select the address options to map.

Summary of Contents for EKI-1526/N/I/TI












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands