manualshive.com logo in svg

Advantech EKI-1526/N/I/TI, User Manual

Share
Download
Advantech EKI-1526/N/I/TI User Manual Download Page 4

EKI-1526(TI) | 1528(TI) User Manual

iv

Warnings, Cautions and Notes

Warning!

Warnings indicate conditions, which if not observed, can cause personal 
injury!

Caution!

Cautions are included to help you avoid damaging hardware or losing 
data.

Note!

Notes provide optional additional information.

This symbol is intended to alert the user to the presence of uninsulated 
dangerous voltage within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons.

Ce symbole est prévu pour alerter l'utilisateur de la présence d'une 
tension dangereuse non isolée à l'intérieur du boîtier du produit, qui peut 
être important pour constituer un risque d'électrocution.

This symbol is intended to alert the user to the potential presence of a 
hot surface.

Ce symbole est prévu pour alerter l'utilisateur de la présence potentielle 
d'une surface chaude.

Summary of Contents for EKI-1526/N/I/TI












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands