17
SFP INSTALLATION AND CONNECTION
To connect the transceiver and fiber cable, follow the steps below. The SFP port is not proprietary. Any
MSA-compliant 1000Mbps fiber SFP can be installed in the port. (Note: SFP modules are typically
terminated with an LC fiber connector). On port 5, the SFP port can accept both SERDES and SGMII
copper SFP while Port 6 only supports SERDES copper SFP. Please refer to information in the
Specification table.
First, insert the SFP transceiver into the SFP module cage. Notice that the triangle mark is at the bottom
of the module.
Figure 3. Triangle Mark
Next, insert the fiber cable into the transceiver.
Figure 4. LC Connector to the Transceiver
To remove the SFP; gently pull it out of the cage manually.
POWER INPUT CONNECTIONS
ESWGP506-2SFP-T accepts 24V~52 VDC input voltage using terminal blocks.
Figure 5. Power Input Connections
