11
PRODUCT DESCRIPTION
The ESWGP506-2SFP-T is a plug-and-play, POE+, managed, industrial Ethernet Switches with IP30
protection. It provides four 10/100/1000Mbps copper ports and two SFP ports for 1000Mbps speed. The
SFP port (Port #5) supports 10/100/1000 or 1000Mbps copper SFPs and gigabit fiber SFPs, for both
Single-mode and Multi-mode fiber. The SFP port (Port #6) supports gigabit fiber SFPs. The switch is both
DIN rail mountable and panel mountable.
The ESWGP506‐2SFP‐T supports IEEE802.3x for flow control, full and half duplex, and provides Auto
Cross for the copper ports. It supports IEEE 802.3 for 10Base-T, IEEE 802.3u for 100BaseTX and
1000BaseTX. Each 10/100/1000Mbps port supports auto negotiation and is 802.af/at compliant for
POE/ POE+. As a POE+ product, it supports legacy/pre-standard PD devices. It also provides PD real-time
protection through the following mechanisms: overload, under-load, over-voltage, over-temperature,
and short-circuit. The MTU support is up to 9720 byte jumbo frames at gigabit speed and 1536 byte
frames at 10Mbps and 100Mbps speeds. The ESWGP506‐2SFP‐T accepts 24-52VDC input voltage with
dual power input using terminal blocks. The operating temperature range is -40˚C to 85˚C (Wide
Temperature Type) with an ambient relative humidity rating of 5 to 95% (Non- condensing). The
optional power supply is the SDR-240-24.
FEATURES
10/100/1000Base-T Auto-Negotiation
IEEE802.3af and IEEE802.3at, including two-event classification
Supports legacy PD devices
Managed, Plug and Play
Full and Half Duplex
Auto Cross feature for the RJ-45 copper port
Four 10/100/1000 copper POE+ ports
Two SFP ports
Each POE+ port supports a maximum of 30W power for a PD device
PoE+ Reset function
IP30 metal enclosure
Din-rail mount, panel mount
Redundant dual VDC power inputs, 24 – 52 VDC
Max Power Consumption 135W
UL standard for safety (IEC/UL/EN60950)
Shock, vibration, and freefall
MAC address capability: 4K
Broadcast Storm Protection: disabled
Operation Temperature:-40˚C to 85˚C
