48
Diagnostics
Scan Network and Ping are two diagnostic tools provided within the SNMP software.
Scan Network
will
display a list of active network devices. The Ping function uses the PING command to give users a
simple but powerful tool for troubleshooting network problems.
Scan Network
Scan Network will display IP address, MAC address, and its current status (active or Inactive). It is
located within Diagnostics.
Figure 46. Network Client List
Ping Test
The Ping function implements the ping command to give users a simple but powerful tool for
troubleshooting network problems. The function's most unique feature is that the
PING
command is
entered from the user's PC, but the actual PING command originates from Managed switch itself. In
this way, the user understands the LAN being tested.
To use the PING function, enter the target IP address, use the default settings or add your IP
Address and then select "Start Test".
Figure 47. PING Test
Once the PING test has been enabled, the following results will be displayed.
