![background image](http://html1.mh-extra.com/html/advantech/adam-4000-series/adam-4000-series_user-manual_2856816283.webp)
Chapter 4 Command Set 4-199
4080, 4080D
Chapter
4
$AA1L
Name:
Read Non-isolated Low Trigger Level.
Description:
Read the low trigger level for non-isolated input signals of a
specified counter/frequency module.
Syntax:
$AA1L(cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address of counter/frequency module that you want to interro-
gate.
1L identifies the Read Non-isolated Low Trigger Level
(cr) is the terminating character, carriage return (0Dh)
Response:
!AA(data)(cr) if the command is valid.
?AA(cr) if an invalid operation was entered.
There is no response if the module detects a syntax or commu-
nication error, or if the specified address does not exist.
! is a delimiter character indicating the command was valid.
? is a delimiter character indicating the command was invalid.
AA (range 00-FF) represents the 2-character hexadecimal
address of a counter/frequency module.
(data) is the low trigger level of non-isolated input signal. The
unit and resolution are both 0.1 V (voltage). The format is a
two digit integer that can range from 1 to 50 ( i.e. 0.1 V
to 5 V ).
(cr) is the terminating character, carriage return (0Dh).
Example:
command:
$051L(cr)
response:
!0508(cr)
The command requests the counter/frequency module at
address 05 to read its non-isolated input signal low trigger
level. The addressed module replies that its low trigger level is
0.8 V.
Summary of Contents for Adam 4000 Series
