21
ACP-2020G User Manual
/ 用户手册
C
ha
pte
r 3
O
pe
ra
tio
n
操
作
3.1.2
System Status LED Indicators
/ 系统指示灯 / 系統指示燈
Two LEDs are placed on the top of the front panel to indicate system health and
activity. Refer to Table 3.1 for a summary of the LED definitions.
机箱前面板上方配有 2 个 LED 指示灯,能够显示系统是否正常运行及运行状态。LED
指示灯的功能描述请参考表 3.1。
主機殼前面板上方配有 2 個 LED 指示燈,能夠顯示系統是否正常運行及運行狀態。
LED 指示燈的功能描述請參考表 3.1。
3.2
The Rear Panel
/ 后面板 / 後面板
The rear plate includes 3-slot I/O brackets and two reserved 9-pin D-SUB openings.
It also includes a reserved phoenix connector opening and switch module opening on
the rear panel (see Figure 3.3).
后面板带有 3 槽 I/O 支架、2 个预留的 9 针 D-SUB 开口,1 个 3 針串口与开关模
块的保留孔(如图 3.3 所示)。
後面板帶有 3 槽 I/O 支架、2 個預留的 9 針 D-SUB 開口,1 個 3 pin 鳳凰接頭與
開關模組的保留孔(如圖 3.3 所示)。
Figure 3.3 Rear Panel
/ 后面板 / 後面板
There is a ground screw with a washer located on the lower right of the rear panel;
when properly grounded, this protects the system in case of electric leakage.
后面板的右下方带有 1 个带垫圈的地脚螺钉,可以保护系统免受漏电损坏。
後面板的右下方帶有 1 個帶墊圈的接地螺絲,可以保護系統免受漏電損壞。
Table 3.1: LED Indicator Functions
/ 系统指示灯 / 系統指示燈
LED
Description
说明
說明
Blue
蓝色
藍色
Red
红色
紅色
Power
/ 电源 / 電源
System Power
系统电源
系統電源
Normal
正常
Abnormal
异常
異常
Hard Disk
/ 硬盘 / 硬碟
Hard Disk Drive Activity
硬盘状态
硬碟狀態
Data access
数据访问
傳輸資料
No light
不亮
Summary of Contents for ACP-2020G
