ADVANSEA C-56 User Manual Download

Page: 53 / 64

Installation and Operation Manual

4-8 Alarms

Press and

then

Alarms:

A warning message with beep sound is displayed when an alarm condition is met by user
setting. Press

to clear the alarm. However, the alarm will be displayed again when the

alarm condition occurs again. The unit provides alarms for various functions.

4-8-1 Fish

Trigger an alarm when echo from the
transducer is matched to preprogrammed fish
profile.

4-8-2 Deep

Trigger an alarm when the depth value
received from the transducer is deeper than a
set value.

4-8-3 Shallow

Trigger an alarm when the depth value
received from the transducer is shallower
than a set value.

4-8-4 Temperature

Trigger an alarm when the reported
temperature from the transducer is same as
a set value.

4-8-5 Temperature rate

Trigger an alarm when the rate of
temperature change from the transducer is
same as a set value.

4-8-6 Low battery

Trigger an alarm when battery voltage is
lower than a set value.

4-8-7 Navigation alarms
Arrival radius :

Trigger an alarm when your

boat is approaching the destination to set
value

Anchor alarm :

Trigger an alarm when your

boat moves more than set valve

XTE :

Trigger an alarm when your boat

moves off the current CDI scale.

Danger :

Trigger an alarm when your boat is

getting closed to dangerous point.

4-8-8 AIS

See the Alarm option of 4-7 (AIS Settings).

4-8-9 DGPS

Trigger an alarm when DGPS signal is not
received.

4-8-10 Restore default

Returns every alarm settings to default.

Summary of Contents for C-56

































































Search results

Summary of Contents for C-56

Reviews:

Related manuals for C-56

Brands by name

Popular brands

ADVANSEA C-56, User Manual

Search results

Summary of Contents for C-56

Reviews:

Related manuals for C-56

Brands by name

Popular brands