ADVANSEA C-56 User Manual Download

Page: 32 / 64

Installation and Operation Manual

3-6 Highway

The

Highway

window shows a 3D view of

the vessel traveling through the water when
navigating to a destination point.

To go to the

Highway

window, press

and select

Highway

icon.

The

Highway

window shows

①

Compass.

②

Data bar.

③

Destination waypoint.

④

Boat’s plotted course to destination.

⑤

DTG scale (Distance To Go).

⑥

BTW scale (Bearing to waypoint).

⑦

CDI (Course Deviation Indicator).

⑧

XTE scale (Cross Track Error).

3-7 Gauges

The

Gauges

window displays all the

information you need during navigation such
as water, engine, fuel related information,
etc.
To select the

Gauges

window, press

and select

Data

icon.

Selecting a Gauges layout

The

Gauges

window can show one of seven

gauge layouts.

To select a layout from the

Gauges

window:

1 Press

and select

Gauge Layout

2 Select one layout.

Changing a gauge in one selected

To change a gauge displayed in a layout in
Data display.
1 Press

and select

Gauge Setup

then

the upper left side gauge will be
highlighted.

2 Select a gauge you want to change and

select Gauge type.

3 Select a data type you want to display.

①

②

⑤

③

④

⑦

⑥

⑧

Summary of Contents for C-56

































































Search results

Summary of Contents for C-56

Reviews:

Related manuals for C-56

Brands by name

Popular brands

ADVANSEA C-56, User Manual

Search results

Summary of Contents for C-56

Reviews:

Related manuals for C-56

Brands by name

Popular brands