Advanced Telemetry Systems, Inc. R4500S Reference User Manual R05-11-A
13
2.0 Setup Menu
The Setup Menu is used to set the clock, select transmitter type, default settings and delay times for the screen,
stationary hold, the channel delay and set the external data transfer settings. Setting the defaults first will make
starting Aerial or Stationary scans much easier and also reduce potential for errors.
To get into the “Setup Menu”, press the
“SHIFT”
key followed by pressing the “
SETUP
” key sequentially.
Again, to maneuver through the menu items, use the
or the
keys.
This is the view of the “Setup Menu”
To return to the Main Menu from the Setup Menu, press
“ESC”
.
2.1 Clock
To access the clock, position the cursor on
Clock
and press
“ENTER”
.
Here is an example of the Clock Menu:
You can press
“ENTER”
to go through each setting, or use the
and the
keys to move forward or
backwards to a specific setting.
To change the numeric value, use the numeric digits on the keypad, or you can use the
and
keys to
increment the numeric value, up or down. For the R4500S to accept a value, press
“ENTER”
. After the Minutes
have been entered, the menu will return to the “Setup Menu”. If no changes are needed in the Clock Menu,
pressing “
ESC
” will return you to the “Setup Menu”. If a numeric number has been changed and
“ENTER”
has not
been pressed, pressing
“ESC”
will return the value to its original value.