manualshive.com logo in svg

Advanced Telemetry Systems R4500S, User Manual, Page: 60 / 73

Share
Download
Advanced Telemetry Systems R4500S User Manual Download Page 60

 

Advanced Telemetry Systems, Inc.          R4500S Reference User Manual          R05-11-A 

60

 
When editing a frequency table the source can be; from a file, from a receiver connected the PC, or a new 
frequency table can be created using ATSWinRec.  A group of twelve tables can be entered for editing, or a single 
table can be entered for editing.   
 
The frequency files are saved as a group (12 tables) – FileName_grp.csv or as a single table – Filename_tbl.csv.   
 

 
Group Frequency Tables  

 
When opening a file of 12 frequency tables, ATSWinRec will be looking for a file with the extension *_grp.csv.  A 
single frequency table file (file name with extension *_tbl.csv) will not be allowed to be opened. 
 
When sending a group (12 tables) of frequency tables to the receiver only tables with frequencies will be sent.  
Also, the option to only send selected tables to the R4500S is available by deselecting any frequency table tabs not 
wanting to be sent. 
 

Single Table Frequencies 

 
When opening a file for a single frequency table, ATSWinRec will be looking for a file with the extension *_tbl.csv.  
A group table file (file name with extension *_grp.csv) will not be allowed to be opened. 
 
If a file is saved as a single table, the file can be loaded to any selected frequency table and sent to the receiver by 
selecting the corresponding frequency table checkbox.  When loading a single table from a file or saving a single 
frequency table to a file, each table selected to be loaded or saved, will have a “Windows” open file dialog box for 
each file.  The figure below is selecting the frequency tables 1 and 3 to be handled as single tables. 

 

 

        

 

 
If a receiver is not connected to the PC when a new frequency table is created, the lowest frequency of the receiver 
will need to be entered.  If the wrong lowest frequency is entered when creating a new frequency table, the table 
will not be sent to the receiver and an error message will appear indicating that the lowest frequencies do not 
match. 
 
 

12.3.4 Delete Data 

 
 

Selecting 

Delete Data

 will delete the data in the receiver.  Warning messages will appear in case if the tab was 

accidentally selected. 

Summary of Contents for R4500S










































































Reviews:

No comments