Advanced Technology Video NVR16P Instruction Manual Download Page 68

Page: 68 / 125

image will be displayed on the bottom of the screen.

Select a data item and click Play. The screen switches to the POS data playback mode.

The POS/ATM function can be available only to the POS/ATM devices compatible with NVR.

4.6. Video Analysis

You can search for data as a preferred function in a specified preset position.

1) Motion: An object in motion will be detected.
2) Tracking: The camera will track a moving

object.

3) Cross: You can detect a moving object

crossing a specified virtual line in a preset
position.

4) Enter: You can detect a moving object that

newly enters in a specified area, (enter box)

5) Abandon: You can detect an object

abandoned in a specified area.

6) Removal: You can detect an object removed

in a specified area.

The Video Analysis function is only available for IP camera supporting video analysis.

Summary of Contents for NVR16P






























































































































Search results

Summary of Contents for NVR16P

Reviews:

Related manuals for NVR16P

Brands by name

Popular brands

Advanced Technology Video NVR16P, Instruction Manual

Search results

Summary of Contents for NVR16P

Reviews:

Related manuals for NVR16P

Brands by name

Popular brands