Advanced Radiant Systems ES/ESH Series, Installation, Operation And Service Instructions

Page: 8 / 40

Page 4
ES/ESH-LT209_10152019 Single Stage Unitary Range
CONFIGURATIONS
MODEL NO.
RATE
(btu/hr)
HEAT EXCHANGER LENGTH FT (m)
BAFFLE
ft (m)
BAFFLE KIT
PART NO.
MINIMUM MAXIMUM
ES/ESH-40
40,000 10 (3) 20 (6) 6 (1.8) T-CT045
ES/ESH-60*
60,000 20 (6) 30 (9) 6 (1.8) T-CT046
ES/ESH-80*
80,000 20 (6) 30 (9) 12 (3.6) T-CT047
ES/ESH-100*
100,000 20 (6) 30 (9) 12 (3.6) T-CT047
ES/ESH-125*
125,000 30 (9) 50 (12) 12 (3.6) T-CT047
ES/ESH-150*
150,000 40 (12) 60 (18) 6 (1.8) T-CT046
ES/ESH-175
175,000 50 (15) 60 (18)
ES/ESH-205*
205,000 60 (18) 70 (21) * *
ES/ESH-220
220,000 60 (18) 70 (21)
* Special configurations available - see below Table 1: Configuration Information
Note:
• Baffles are always placed in the last section of radiant tube.
• Baffles are either aluminized or stainless steel sections 6' long.
• When only 6' is required an aluminized steel baffle is installed, except on the ES/ESH-40 where a special 6'
stainless steel baffle with a red identification tab must be installed.
• When 12' is required, a 6' stainless steel baffle is inserted first into the end tube followed by another 6'
aluminized baffle. The stainless steel baffle is now closest to the burner.
Baffle Kit Parts Reference
• T-CT045 Baffle Kit, ES/ESH-40,000 BTU/hr only, 6' long, stainless steel w/ red identification tab.
• T-CT046 Baffle Kit, 6' long, aluminized steel
• T-CT047 Baffle Kit, 12' long aluminized & stainless steel.
• T-CT095 Baffle Kit, ES/ESH-205,000 BTU/hr – 50 ft ONLY
*Additional Approved Special Configurations
• 60,000 BTU/Hr 15' heat exchanger with 6' Stainless steel baffle with red tab (Natural Gas Only)
• 80,000 BTU/Hr 40' heat exchanger with NO baffle or 6' aluminized baffle.
• 100,000 BTU/Hr 40' or 50' heat exchanger with NO baffle or 6' aluminized baffle
• 125,000 BTU/Hr 40' or 50' heat exchanger with 6' aluminized baffle
• 150,000 BTU/Hr 60' heat exchanger with NO baffle
• 205,000 BTU/Hr 50' heat exchanger with a 4' baffle at 40', and an 8' baffle at 50'. (See figure 3)
3'-6" 7'-6"
40'
50'
P/N T-CT026 P/N T-CT027
FOLD
OVER
FOLD
OVER
Baffle Kit P/N T-CT095
Figure 3: Baffle location for all ES/ESH-205, 250,000 btu/hr, 50ft models ONLY (P/N T-CT095 Baffle Kit)