Advanced Instruments 3900, User Manual

Page: 76 / 131

58
The Advanced
®
Osmometer Model 3900 User’s Guide
Needed; Press Stop to Continue ” message will be dis-
played.
The tests available from the TEST button are listed in Table 6.
An item on the TEST menu may be selected in either of the following
two ways:
• At “
Select Test Item ”, repeatedly press the > button to step the dis-
play forward or < to step the display backward through the list. The
list is cyclic; pressing > at the last item cycles the display to item 0.
Continue pressing > or < until the desired test is displayed. While the
desired test is displayed, press the START button.
• Or, at “ Select Test Item ”, press the START button. The display will
change to “ Test Menu #: 0 ”. From the list above, type the number of
the desired test on the numeric keypad. The “ 0 ” on the display will
change to the number typed, if valid. Then press ENTER. The dis-
play will show the selected test. Next, press the START button.
The requirements are different for each test but are guided by the dis-
play.
0. Select Test Item
1. A/D Tests
2. Stir/Freeze Test
3. Probe Bin Test
4. Serial Loop Test
5. Display/Print Test
6. Beeper Test
7. Keypad Test
8. Head Up/Down Test
9. Cassette Index Test
10. Cassette Pusher Test
11. Head Rotation Test
12. Tube Transport Test
Test Mode Options
Table 6: Test Mode Options