Advanced Energy THYRO-AX, Manual

Page: 85 / 117

54 55
Actual value
button
FIG. 8 EXAMPLES OF AREAS TO BE PRESSED FOR ACTUAL VALUE
BUTTON
7.3 MESSAGE OVERVIEW AND ACKNOWLEDGMENT
If there is a message (event) at which the display turns red,
the lower button (
W
Events
W
or
W
Error
W
) can be used
in the message overview to show all active events.
If there is a message to acknowledge among the active
messages (s. table 8), it can be acknowledged by pressing
the OK button.
!"
7.2 ACTUAL VALUE VIEW AND ACTUAL VALUE BUTTON
When pressing the actual value button several times the current values
of the Thyro-AX are displayed over several screens. By pressing several
times the screens are alternately displayed and start from the begin-
ning again if pressed again. Depending on the number of phases of
the power controller the actual value view is displayed for all phases.
The screen which appears at the end gives the type information of the
Thyro-AX. The last line on the screen gives the EasyStart identification
The actual value view can also be reached via Menu -> ActVal .
Start Start
Using the actual value button you can leave the current menu at any
time in order to get back to the actual value view. In doing so the
current menu is aborted without being saved permanently in EEPROM,
however, the current alteration remains active and can be saved ma-
nually. The actual value button extends over the top half of the screen.
This means that regardless of what is displayed in the upper half of the
screen, the upper area, when pressed, functions as the actual value
button, even when the text is displayed. This enables a quick change
of the display for the values following an alteration of parameters.
During EasyStart changing to the actual value view via the button is not
possible.