36
37
For devices 1000A/1400A/1500A:
Before connecting the device all coverages (above and / or below as
well as in the front) have to be removed.
The connections coming from the customer side have to be connected
to the copper bars of the device. Afterwards the according parts have
to be removed with a side cutter so that the area around the copper
bars to free for connection. Please be consider that an adequate IP20
protection can only exist when the area around the copper bars has
only be removed as may be necessary.
Then the according coverages have to be fixed again on the device.
The following pictures illustrate a potential position of the coverages:
Summary of Contents for THYRO-AX
Page 117: ...118...
