background image

44  

Naída CI  Sound Processor User Guide

The Zn-Air Battery Pak

The Naída CI uses size 675 Power Implant disposable batteries (675P). Regular size 675 
hearing instrument batteries will not be powerful enough for a cochlear implant.

Inserting Zn-Air Batteries

  Remove the Zn-Air batteries from their package, making sure to remove the tape from the flat 

positive (+) side of the cell. Removing the tape allows oxygen to flow in and activate the battery, so 
be sure to install it  immediately after peeling off the tape.

  Note: If the cells are inserted incorrectly, the battery drawer will not close.

  

Place two Zn-Air batteries, positive (+) 

(flat) side up, in the two openings in the 

battery drawer.

Once the batteries are flush with 

the top of the battery drawer, gently 

slide the battery drawer back into the 

battery cartridge.

 4

 5

Holding the Zn-Air Battery Pak in one hand, 

gently but firmly push down on the lever on 

the back of the battery cartridge. This will 

cause the drawer to pop out of the bottom 

of the cartridge.

Pull the battery drawer out of the 

cartridge with the other hand.

 1

 2

 3

Summary of Contents for Nadia CIQ70
































































Reviews: