22
Naída CI Sound Processor User Guide
Removing the Naída CI from the Clip
The processor should come out of the clip with the battery still attached to the processor. It is
recommended that the T-Mic 2/Earhook be removed from the Naída CI before wearing the
processor completely off the ear. Please see
Removing the T-Mic 2/Earhook.
Using the Naída CI Sound Processor
Powering the Naída CI
CAUTION:
Power supplies and battery chargers should be operated in an open area
to ensure adequate airflow. While, todate, no injuries have been reported, components
may become hot during normal use or in the event of a fault.If the device’s temperature
results in discomfort or pain when touched, disconnect the power source and contact
your local AB representative.
Depress the spring end of the clip to open
and secure the sound processor to the
desired location on clothing or in hair.
To disengage the Naída CI processor
from the clip, first pull back the
release tab that is helping to hold the
processor in the clip.
5
1
Carefully remove the Naída CI, leading
with the internal earhook portion. Be
careful not to use the PowerCel as a lever
to remove the Naída CI; this may damage
the PowerCel or the connector on the
Naída CI.
2
