Operating Instructions 04_2022
1
Service Address:
eccola
GmbH - Im Alber 8 - D-73084 Salach - Tel.:0049/7162/948996
Internet:
www.eccola.de
email: [email protected]
Operating Instructions H-MAN X 1
Congratulations
H-MAN X 1 the quick hearing test
You have chosen our product. Thank you for your confidence and we wish a
successful use for many years.
Warranty
1 year warranty. All faults/defects you have during the warranty time will be repaired free of
charge. Excepted are only wearing parts and gross negligence.
If you have a technical defect please send us the complete H-MAN X 1 together with a short
description of the fault.
The first use
Component parts:The H-MAN X 1 consists of the following parts:
–
The head including the electronics and the headphones
–
1 battery set
–
2 folder racks for information sheets incl. Screws
Starting up
You get the H-MAN X 1 operationally. It is only necessary to fix the folder racks at the
H-MAN X 1 with the screws.
Put on the headphones an press the start key. If the LED lights up you should hear a
tone. The frequencies are played alternately on the right and on the left. The test
starts on the right with 0,5kHz end ends with 4kHz on the left.
If the tones are too soft for your location or too loud (background noises), you have
the possibility to readjust the volume (see functional characteristics).
Functional characteristics
Important to know:
The hearing test is operated with batteries (4 pieces, 1,5 V) and so you have the possibility to
use it everywhere. The test frequencies on each side; 4 tones 0,5/1/2/4kHz.
You have to remove the back cover sheet to adjust the H-MAN X 1according to your
individual wishes. Please put the head on a soft padding to prevent damages. Then remove
the 2 screws with less pressure on the back cover sheet. At last you have to fix the back
cover sheet again with the 2 screws.
A. To change the batteries you have to remove the battery cover on the backside with
the help of a screwdriver. Please pay attention that the batteries are polarised
correctly.
B. On the next side you will find an information how to find the position of the trimmers
(adjustable resistors), jumpers (plugs) and the connections on the circuit board more
quickly. To carry out your individual adjustments you have the following possibilities:
