ACT4 Electrofusion Welding Unit – Operator Manual – Rev: 4.1.G
© 2008. Advance Welding.
Page 28
Quick Start Guide
Prepare the pipe and fitting according to
the manufacturer’s specification.
Unwind all cables from the welding unit.
Connect the welding cable to the fitting.
Connect the supply cable to the correct
voltage and switch it on.
The unit will power up and go to the main
menu.
Press the A Quick-key to select Manual
welding.
If the unit is set to data log, enter the
details as shown on the screen.
Enter the required welding time.
Press the Start button.
The time will count down to zero as the
fitting is being welded. Any faults will be
indicated on the display.
At the end of the weld, disconnect the
welding cable to reset the unit.
Press the Star key to return to the main
menu if required.
