ACT4 Electrofusion Welding Unit – Operator Manual – Rev: 4.1.G
© 2008. Advance Welding.
Page 14
Extreme Low Temperature Operation (Optional)
The welding unit has an extended temperature range option, which
allows it to work down to -40
o
C. This unit has special supply and
welding cables that remain flexible at extremely low temperatures. It
also has an internal case heater to warm the electronics to an
acceptable working temperature.
When the temperature inside the unit is below -15
o
C, the following
operation will apply:
Plug the welding unit into the correct supply voltage and switch it
on.
The internal case heater will switch on and an indicator light will
show on the lid next to the display.
When the internal temperature warms to the correct level, the case
heater will switch off, the indicator light will switch off and the
electronics will switch on.
The operation of the unit is now as previously described.
Extended temperature range facility is a factory-fitted option and
must be requested when ordering the product from you supplier.
