ACT4 Electrofusion Welding Unit – Operator Manual – Rev: 4.1.G
© 2008. Advance Welding.
Page 17
Hidden Data Download.
Even when data logging is not selected for a weld, details are still
recorded but then hidden from the normal data download, and not
selected when the data is downloaded to a USB memory disk. To
aid fault finding, all welds carried out including those “not logged”
can be downloaded.
Lifetime Weld Memory.
(Optional hardware) The entire weld memory for the lifetime of the
welding unit is stored in an internal SD memory card. This can be
downloaded as an archive of all welds carried out.
Purchase Date.
The date the unit was sold to the customer can be set and viewed.
This allows more accurate record keeping.
Warranty Period.
The date the unit was first used can be viewed. This allows
accurate control of the warranty period.
Clear Data Log.
The data log memory can be cleared by entering a password.
Information
Information about the welding unit can be viewed from the options
menu. Select more options and then enter the password A I N F
followed by the A Quick-Key.
The serial number and part number of the unit are shown. The
calibration date and calibration period are also shown. Press the A
Quick-Key and the following weld counters are shown: Total weld
count, weld count at last calibration, welds done since last
calibration.
