ACT4 Electrofusion Welding Unit – Operator Manual – Rev: 4.1.G
© 2008. Advance Welding.
Page 21
127: Power off failure.
If the power is turned off while the unit is welding, this fault will be recorded to
the datalog.
Maintenance
Regularly check for obvious defects such as loose or damaged
cables and connectors. Look for warn components and broken
covers or housings.
There are no user serviceable parts inside the unit. It should be
returned to an approved service agent for repair and calibration.
It is recommended that the unit is calibrated every twelve months.
After use, clean the outside of the unit with a soft brush or cloth.
Carefully wind up and store the cables around the frame in the
location provided.
