40
Fitting the Windskirt
Attach the neoprene Windskirt to the matching velcro on the rear of
the harness. Close both side zippers and fi x the reserve handle (be
sure it is in the correct position).
The velcro located under the front of the seat board for additional bal-
last also fi xes the Windskirt perfectly to the harness. It stops fl apping
and slippage of the skirt.
Pull the speed system line through the three side pulleys and the
eyelet of the Windskirt. Loop the foot stirrup into both of the plastic
buckles and tension the speed system with the help of the bungy – to
the left or the right side depending on personal preference. This two
step system has been designed to provide a fl exible solution enabling
the pilot to use just one leg.
Support the Windskirt on both sides by fi tting the strengthened ope-
nings over the main carabiners of the harness.
Info: The windskirt sizes only match the corresponding
harness sizes and they are not interchangeable.
08255200_Advance_HB_Impress 40
08255200_Advance_HB_Impress 40
16.05.2008 7:00:56 Uhr
16.05.2008 7:00:56 Uhr
Summary of Contents for iMPRESS 2
Page 81: ......
