NetVanta 3000 Series Hardware Installation Guide
Physical Descriptions
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
51
NetVanta 3458 Rear Panel Design
The NetVanta 3458 rear panel is shown below with a module installed.
Appendix A on page 101
provides
pinouts.
Figure 25. NetVanta 3458 Rear Panel Layout
NetVanta 3458 Rear Panel Interfaces
SLOT 1/SLOT 2 NET/DBU Option Slots
The
SLOT 1/SLOT 2 NET/DBU
option slots support various NIM plug-in option modules. These
option modules are described in the section
Option Modules on page 53
.
PoE
The NetVanta 3458 has a 48 VDC port on the rear panel to provide the voltage required for PoE
applications. This port is active only if the NetVanta 3458 has been ordered with the PoE option. Note
that the NetVanta 3458 itself cannot be powered by this port.
8 Switch Port Interfaces
Ports 1 through 8 are RJ-45 connectors used to access the fully managed 10/100Base-T Ethernet
switch.
10/100Base-T Ethernet Interfaces
The Ethernet ports (
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors. These ports provide the following:
•
10Base-T or 100Base-T dual stacked connector
•
Auto-MDIX
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
Power Connection
All of the 1U-high products have universal power supplies and are shipped with the appropriate cable.
Please refer to
Supplying Power to the Unit on page 83
for connection details.
PoE
SLOT 2 NET/DBU
SLOT 1 NET/DBU
ETH 0/2
ETH 0/1
1
2
3
4
5
6
7
8
SWITCH
48V
