NetVanta 3000 Series Hardware Installation Guide
Physical Descriptions
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
49
•
Size: 1.7-inch H x 17.2-inch W x 8.0-inch D
•
AC Power Requirements: Auto-ranging power, 100 to 250 VAC, 50/60 Hz, 0.4 A maximum
•
RoHS compliant (Telecommunications exemption)
Network Interface Modules and Dial Backup Interface Modules Supported
The NetVanta 3458 supports a variety of interchangeable NIMs and DIMs. The NIMs available for the
NetVanta 3458 provide a variety of WAN connectivity options including the following:
•
56K/64K (DDS)
•
T1/FT1
•
T1/FT1 + DSX-1
•
Dual T1
•
E1/FE1
•
E1/FE1 + G.703
•
Serial (V.35/X.21/EIA 530)
•
SHDSL, Annex A and Annex B
•
ADSL, Annex A and Annex B
•
3G CDMA, 1xRTT, 1xEV-DO Revision 0, 1xEV-DO Revision A
•
USB WWAN
If needed, an analog modem, ISDN BRI U, or ISDN BRI S/T DIM can plug onto the NIM, providing dial
backup capability. Refer to
Installing Dial Backup and Network Interface Modules on page 87
for more
details.
Refer to
Installing the 3G CDMA NIM Antennas on page 90
for details regarding the antenna installation
on the 3G CDMA NIM.
Refer to
Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93
for details on
installing and removing a USB cellular modem from the USB WWAN NIM.
NetVanta 3458 Shipping Contents
Each NetVanta 3458 unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Warranty, Repair, and Return
section of the
Support
page on the ADTRAN website at
http://www.adtran.com/support
).
Domestic Shipping Contents
Shipments of the NetVanta 3458 domestic units include the following items:
•
NetVanta 3458 base unit with attached mounting brackets and screws
•
AOS documentation bundle
•
Power cord
