NetVanta 3000 Series Hardware Installation Guide
Physical Descriptions
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
43
Figure 21. NetVanta 3448 Rear Panel Layout
NetVanta 3448 Rear Panel Interfaces
SLOT 1 NET/DBU Option Slot
The
SLOT 1 NET/DBU
option slot supports various NIM plug-in option modules. These option
modules are described in the section
Option Modules on page 53
.
PoE
The NetVanta 3448 has a 48 VDC port on the rear panel to provide the voltage required for PoE
applications. This port is active only if the NetVanta 3448 has been ordered with the PoE option. Note
that the NetVanta 3448 itself cannot be powered by this port.
8 Switch Port Interfaces
Ports 1 through 8 are RJ-45 connectors used to access the fully managed 10/100Base-T Ethernet
switch.
10/100Base-T Ethernet Interfaces
The Ethernet ports (
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors.
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) that provides for local management and
configuration (via a DB-9 female connector).
Power Connection
All of the 1U-high products have universal power supplies and are shipped with the appropriate cable.
Please refer to
Supplying Power to the Unit on page 83
for connection details.
NetVanta 3450
The NetVanta 3450 is a high-performance, modular IP access router designed for cost-effective branch
office connectivity over MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, or Ethernet networks.
This section includes a list of features, a list of shipping contents, and a description of the unit’s front and
rear panel designs. For hardware installation topics, such as mounting the unit, installing option cards, and
installing the optional SODIMM, refer to the following sections:
•
Mounting Options on page 76
•
Supplying Power to the Unit on page 83
Connection directly to an external modem requires a cross-over cable.
WAN-T1
DBU
CONSOLE
SLOT 1 NET / DBU
48 V
