NetVanta 3000 Series Hardware Installation Guide
Physical Descriptions
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
41
Network Interface Modules and Dial Backup Interface Modules Supported
The NetVanta 3448 supports a variety of interchangeable NIMs and DIMs. The NIMs available for the
NetVanta 3448 provide a variety of WAN connectivity options including the following:
•
56K/64K (DDS)
•
T1/FT1
•
T1/FT1 + DSX-1
•
Dual T1
•
E1/FE1
•
E1/FE1 + G.703
•
Serial (V.35/X.21/EIA 530)
•
SHDSL, Annex A or Annex B
•
ADSL, Annex A or Annex B
•
3G CDMA, 1xRTT, 1xEV-DO Revision 0, 1xEV-DO Revision A
•
USB WWAN
If needed, an analog modem, ISDN BRI U, or ISDN BRI S/T DIM can plug onto the NIM, providing dial
backup capability. Refer to
Installing Dial Backup and Network Interface Modules on page 87
for more
details.
Refer to
Installing the 3G CDMA NIM Antennas on page 90
for details regarding the antenna installation
on the 3G CDMA NIM.
Refer to
Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93
for details on
installing and removing a USB cellular modem from the USB WWAN NIM.
NetVanta 3448 Shipping Contents
Each NetVanta 3448 unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Warranty, Repair, and Return
section of the
Support
page on the ADTRAN website at
http://www.adtran.com/support
).
Domestic Shipping Contents
Shipments of the NetVanta 3448 domestic units include the following items:
•
NetVanta 3448 base unit
•
AOS documentation bundle
•
4 rubber mounting feet
•
Power cord
•
PoE external power supply with power cord (with PoE option only)
