NetVanta 3000 Series Hardware Installation Guide
Option Modules
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
65
NetVanta SHDSL NIM, Annex A (P/N 1200936E1)
The NetVanta SHDSL NIM, Annex A (shown in
Figure 34
) provides a WAN-SHDSL interface for the
NetVanta 3000 Series. See
Table A-11 on page 104
for the SHDSL connector pinouts.
Figure 34. NetVanta SHDSL NIM, Annex A
WAN-SHDSL
ANNEX A
Features and Specifications
Operating Mode
•
Line termination (CO)
•
Network termination (CPE)
G.SHDSL Interface
•
Supported Standards: ITU-T G.991.2,
SHDSL Annex A
M-pair bonding of 2 pairs - ITU-T
G.991.2
•
Line Rate (2-wire mode): 192 to
2304 kbps in 64k increments
•
Line Rate (4-wire mode): 384 to
4608 kbps in 128k increments
•
Payload: ATM (AAL5)
•
Line Code: TC-PAM
•
Connector: RJ-45
Clock Source
•
CPE Operating Mode: Network
•
CO Operating Mode: Internal
Diagnostics
•
Network loopbacks (local and remote)
•
Alarm generation and detection
•
Programmable alarm threshold setting for
loop attenuation and signal-to-noise ratio
Compliance
•
EMC - see
Electromagnetic
Compatibility (EMC) Table on page 7
.
•
ACTA/FCC Part 68
•
UL/CUL 60950
•
RoHS compliant (Telecommunications
exemption)
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
Physical
•
Dimensions: 2.75-inch W x 4.25-inch D
