ADTRAN NetVanta 2730, Getting Started Manual

Page: 60 / 74

ADTRAN NetVanta 2730 Getting Started Guide Page 55
Creating Address Objects
The Network > Address Objects page allows you to create
and manage your Address Objects. You can view Address
Objects in the following ways using the
View Style menu:
• All Address Objects – displays all configured Address
Objects.
• Custom Address Objects – displays Address Objects
with custom properties.
• Default Address Objects – displays Address Objects
configured by default on the ADTRANsecurity appliance.
To add an Address Object:
1. Navigate to the Network > Address Objects page.
2. Below the Address Objects table, click Add .
3. In the Add Address Object dialog box, enter a name for
the Address Object in the Name field.
4. Select the zone to assign to the Address Object from the
Zone Assignment drop-down list.
5. Select Host , Range , Network , MAC , or FQDN from the
Type menu.
- For Host , enter the IP address in the IP Address field.
- For Range , enter the starting and ending IP addresses
in the Starting IP Address and Ending IP Address
fields.
- For Network , enter the network IP address and
netmask in the Network and Netmask fields.
- For MAC , enter the MAC address in the MAC Address
field.
- For FQDN , enter the domain name for the individual
site or range of sites (with a wildcard) in the FQDN field.
6. Click OK .
Configuring NAT Policies
NAT policies allow you to control Network Address Translation
based on matching combinations of Source IP address,
Destination IP address and Destination Services. Policy-based
NAT allows you to deploy different types of NAT simultaneously.
The following NAT configurations are available:
• Many-to-One NAT Policy
• Many-to-Many NAT Policy
• One-to-One NAT Policy for Outbound Traffic
• One-to-One NAT Policy for Inbound Traffic (Reflexive)
• One-to-Many NAT Load Balancing