NetVanta 1534/1544 Series
Physical Descriptions
61702590G1-34E
Copyright © 2013 ADTRAN, Inc.
17
RPS
The rear panel has a power input to a +12 VDC RPS. The
RPS
LED, located on the front panel of the
unit, indicates when the unit is being powered from the RPS.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
Supplying Power to
the Unit on page 36
for connection details.
NetVanta 1534P Front Panel Design
The NetVanta 1534P front panel is shown below.
Table 1 on page 25
describes all of the LEDs, and
Appendix A on page 47
shows the connector pinouts.
Figure 3. NetVanta 1534P Front Panel Layout
Front Panel Features
Status LED
The
STAT
LED is located on the left side of the unit and indicates the unit’s status.
Redundant Power Supply LED
The
RPS
LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
Extended Power Supply LED
The
EPS
LED is located on the left side of the unit and indicates when the unit is receiving power from
the EPS.
Link/Activity LED
The
LINK/ACT
LED is located on the left side of the unit and indicates that the port LEDs are
displaying link/activity status.
Power over Ethernet LED
The
PoE
LED is located on the left side of the unit and indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The
VCID
LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
LED Mode Switch (Future Release)
The LED mode switch is located on the left side of the unit and is used to toggle Ports
1
through
48
between link/activity and VCID display modes.
NetVanta 1534P
25
26
27
28
1G
2.5G
VCID
PoE
LINK/ACT
EPS
RPS
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
