Physical Descriptions
NetVanta 1534/1544 Series
20
Copyright © 2013 ADTRAN, Inc.
61702590G1-34E
Power over Ethernet
The NetVanta 1544P device provides the same basic functionality as the NetVanta 1544 product. PoE provides
the ability to detect attached PDs, and deliver 48 VDC to the PD via Ethernet cabling. The NetVanta 1544P is
fully compliant with the IEEE 802.3af PoE and IEEE 802.3at PoE+ standards. By default, the PoE switch
discovers and provides power to IEEE-compliant PDs. The NetVanta 1544P also supports legacy PDs.
CompactFlash
The NetVanta 1544F’s CompactFlash slot, located on the rear panel, allows nonvolatile memory expansion with
supported densities ranging from 64 MB to 1 GB.
NetVanta 1544 Series Shipping Contents
Each NetVanta 1544 Series unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit,
immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Support
page on
the ADTRAN website at
http://www.adtran.com/support
).
Domestic shipments of the NetVanta 1544 Series includes the following items:
•
NetVanta 1544 base unit
•
A detachable power cable with a grounded, three-prong plug
•
Quick start guide
•
Two 19-inch rack mounting brackets with four mounting screws
International shipments of the NetVanta 1544 Series includes the following items:
•
NetVanta 1544 base unit
•
All necessary power cords
•
Quick start guide
•
Two 19-inch rack mounting brackets with four mounting screws
NetVanta 1544 Front Panel Design
The NetVanta 1544 front panel is shown below.
Table 1 on page 25
describes all of the LEDs, and
Appendix A on page 47
shows the connector pinouts.
Figure 5. NetVanta 1544 Front Panel Layout
25
26
27
28
STAT
RPS
VCID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
