ADTRAN Express XL 1200070L1, User Manual

Page: 38 / 187

Chapter 2: Installation
22 Express XL/XLT User Manual 61200.070L1-1
TELEPHONE CONNECTION (XLT ONLY)
Basic Telephone Service
The Express XLT supports an analog DTMF telephone type (AT&T 2500) with
the POTS interface, part number 1200070L2. The telephone or other analog de-
vice (like a fax machine or modem) plugs into an RJ-11 jack labeled
PHONE
located on the rear of the unit. Using a multipoint line allows the POTS and
data port to have unique phone numbers.
Supplementary Services
Supplementary services such as call holding, three- or six-way conferencing,
call transfer, and call waiting are fully supported by the Express XL/XLT on
a touch-tone telephone. Table 2-A explains how the flash-hook is used for han-
dling multi-call situations.
DTMF Keypad
The following functions are performed on a touch-tone phone:
• Disable call waiting: Press **0
• Enable call waiting: Press **1
• Redial last number: Press **5
• Enable ExpertISDN: Press **6
• Enter Area Code: Press **7XXX
(where XXX is a 3-digit area code.
This must be entered first, before
enabling ExpertISDN.)
• Enter Phone Number 1: Press **8XXXXXXX
(where XXXXXXX is the 7- digit
phone number. This must be entered
before enabling ExpertISDN.)
• Enter Phone Number 2: Press
**9XXXXXXX
(where XXXXXXX is the 7-digit
phone number. If only one phone
number is assigned, this does not have
to be entered.)