ADTRAN Express L128, User Manual

Page: 175 / 200

Appendix F: Frame Relay Firmware Version
158 Express L128/L128T User Manual 61202.070L1-1
IPXCP - Shows UP if PPP IPX Control Protocol has negotiated
successfully
User - Displays the user name of the PPP peer
Number(s) - Shows the phone number dialed if outgoing call or caller
ID if incoming call.
Connect Time - Shows the date and time when the call last connected.
Up Time - Displays how long the call has been connected.
Tx Pkts - Number of packets transmitted
Rx Pkts - Number of packets received
Tx Bytes - Number of bytes transmitted
Rx Bytes - Number of bytes received
Tx Rate - Current application data transmission rate
Rx Rate - Current application data reception rate
Tx Link Rate - Current actual data transmission rate
Rx Link Rate - Current actual data reception rate
Sessions/DLCI Table
The status of all virtual circuits is displayed here.
DLCI - The DLCI that is associated with this virtual circuit.
State - The state of the virtual circuit:
Inactive - means the circuit exists but has been deactivated by
the Frame Relay switch.
Exists - means the circuit exists at this point and should be
activated soon.
Active - means the circuit is fully active.
Off - means the circuit has been turned of by the DLCI mapping
active selection.
Tx Frames - Number of Frame Relay packets that have been
transmitted via this DLCI.