ADTRAN Express L128, User Manual

Page: 151 / 200

Appendix B: Log Messages
134 Express L128/L128T User Manual 61202.070L1-1
Retrieved <number>
level 5
The Express L128/L128T has retrieved a previously held call. If no caller ID is
available for the ISDN line, then <number> will be blank for incoming calls.
Ring <number>
level 5
An incoming call from <number> was ringing. If no caller ID is available for
the ISDN line then <number> will be blank.
SOURCE NOT ISDN
level 4
The incoming calling party is not ISDN. This is a warning and is most often
seen for POTS calls.
Signal 0xNN
level 4
A signal information element was received from the ISDN switch with the val-
ue NN in hexadecimal.
Transfer <number>
level 5
The Express L128/L128T has transferred the held call with the active call. If
no caller ID is available for the ISDN line, then <number> will be blank for in-
coming calls.
Transfer Rej <number>
level 5
The Express L128/L128T attempted to transfer but was rejected by the ISDN
switch. If no caller ID is available for the ISDN line, then <number> will be
blank for incoming calls.
Network Log Messages
Attempting to add bad IP iface route: ifnum=<inter> dest=<ip>
level 4
An IP address <ip> could not be used for the interface number <inter>.
DHCP couldn't alloc mem
level 1
A DHCP response could not be generated due to memory allocation problems.