ADTRAN Express L128, User Manual

Page: 80 / 200

Chapter 3: Terminal Menu Operation and Structure
61202.070L1-1 Express L128/L128T User Manual 63
Configuration/Connection List
The Express L128/L128T uses the Connection List to specify the profile each
user or group of users are to have when connected. Each profile or item in the
Connection List has many configurable parameters giving high flexibility on a
per user basis.
Up to 15 profiles can be defined in the Connection List. Calls cannot be origi-
nated or answered unless a Connection List profile is defined. The Express
L128/L128T factory defaults with one profile called
DEFAULT . This profile
is used for any incoming calls when Configuration/Security/Authentication
= None or when the username of the connecting PPP peer is not found in the
Connection List.
To insert a new profile, press the I key when over the Num column. A new inserted
profile will always be set up with the default parameters. To copy parameters from an
old profile to this newly inserted profile, use the copy (C) and paste (P) keys. Entire
configuration trees can be copied with this method.
Figure 3-8 shows the Connection List menu.
Figure 3-8
Configuration/Connection List Screen