ADTRAN Express L128, User Manual

Page: 59 / 200

Chapter 3: Terminal Menu Operation and Structure
42 Express L128/L128T User Manual 61202.070L1-1
Static Routes/Private
Write security: 4; Read security: 5
When set to
No , the Express L128/L128T will advertise this static route using
RIP. Otherwise, setting to Yes means that the route is kept private.
IP/IP Router
The IP router is configured under this menu as follows.
IP Router/Mode
Write security: 3; Read security: 5
When this option is set to
On (def), the Express L128/L128T will advertise and
listen to routes from other IP routers. If Off , the route table is still used but
only static routes are used for routing IP packets and only the Ethernet port is
used. IP packets can be sent over the WAN, but only when bridged.
IP/RIP
Write security: 3; Read security: 5
The Routing Information Protocol (RIP) is supported by the Express L128/
L128T. The following parameters are required for setting up the mode on the
Ethernet port:
RIP/Mode
Write security: 3; Read security: 5
This option turns RIP
On (def) or Off .
RIP/Protocol
Write security: 3; Read security: 5
Version can be
V1 (def) or V2 .